Iso Ddin Radio Provision; Kit Assembly - Metra 95-7801 Instrucciones De Instalación

Acura/honda/isuzu 1990-2006
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Attention: Use the steps below for the following vehicles: Honda CR-V 1997-2001,
Honda Prelude 1997-2001, Honda Civic 1999-2000. For all other vehicles skip to the
next kit assembly section.

ISO DDIN radio provision

1. Slide the radio into the factory bracket assembly.
2. Align the holes in the brackets with the holes in the radio, and then secure it
with the screws included with the radio.
3. Cut and remove the dividing rib from the radio housing, and then snap it into the
opening of the factory radio trim bezel.
(A)
(Figure A)
95-7801

Kit Assembly

(Figure A Honda CR-V 1997-2001)
(Figure B Honda Prelude 1997-2001)
(Figure C Honda Civic 1999-2000)
4. Locate the factory wiring harness and antenna connector in the dash, and
complete all necessary connections to the radio. Metra recommends using the
proper mating adapter from Metra and/or AXXESS. Re-connect the negative
battery terminal and test the radio for proper operation.
5. Reassemble the dash in reverse order of disassembly.
(B)
(Figure B)
14
(C)
(Figure C)

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido