Domo DO441BL Manual De Instrucciones página 35

www.domo-elektro.be
3. Always clean the blender immediately after us for easy cleaning. Do not let food
dry in the jar or the blade assembly, this will make them harder to clean.
4. Disassemble the removable parts. Turn the jar counterclockwise and remove
it from the motor unit. Loosen the blade assembly from the bottom of the jar
by turning it clockwise. Remove the blade assembly and the sealing ring. Also
remove the lid from the jar and the measuring cup from the lid.
5. Clean the measuring cup, the lid, the sealing ring and the jar by hand or in the
dishwasher. When using the dishwasher, make sure that the temperature does not
exceed 70°.
6. Clean the blades with some warm soapy water and rinse under the tap. Do not
touch the blades and be extra careful. Do not immerse the blade assembly in
water. Let the blade assembly dry upside down, out of reach of children.
7. Wipe the motor unit clean with a damp cloth and dry thoroughly. Remove
stubborn stains by scrubbing with a non-abrasive cleaner. If liquids spill onto the
motor unit, unplug the blender, wipe the motor unit clean with a damp cloth and
dry thoroughly.
Caution:
• Never immerse the motor unit in any liquid to avoid the risk of electrical shock.
• Do not use any rough scouring pads or cleaners on the parts or on the finish of the
appliance.
35
DO441BL