Technical Data; Included In Delivery; General Safety Notes - EINHELL ESU 270 Instrucciones De Servicio

Anleitung ESU 270 12-sprachig 08.11.2001 11:05 Uhr
GB
Please read these operating instruc-
tions carefully with particular atten-
tion to the safety notes. Always
store these operating instruccions
together with the vibrating grinder.

Technical data

Voltage 230 Volts
Power consumption 250 Watts
Grinding surface area 227 x 115
Sandpaper size 280 x 115
Vibrations per minute 20,000
Sound pressure level LPA 73 dB(A)
Sound power level LWA 83 dB(A)
Vibration a w 6 m/s 2
Weight 2 kg
Totally insulated

Included in delivery

Inserting the dust collector bag or vacuum
ESU 270,
Dust collector bag,
Operating instructions,
3 sheets of sandpaper

General safety notes

– Always remove the plug from the
power supply socket before carrying
out any maintenance or repair work
such as cleaning the sander or
Caution!
changing the sandpaper!
Health reasons require that you use the dust
– Always disconnect the machine by
collector bag.
removing the plug from the socket,
not by pulling on the mains cable.
– Always wear safety goggles and
dust mask when working.
– Keep the workplace clean and well
illuminated.
– Ensure that the workpiece is suffi-
ciently secured so that you are able
to work safety and effectively.
– Keep children away from the
machine.
– Always keep your machine clean,
and check for possible defects of
damage after every job.
– Always ensure that the switch is
Warning!
– The pad sander is not designed
switched off before you insert the
for wet sanding.
plug into the power supply socket.
– When using a cable reel, make
– Ensure that any platforms you are
sure to roll up the cable comple-
working on are sturdy and stable.
tely (wire diameter min. 1 mm
– If the machine is damaged, use the
– Disconnect the sander from the
exploded diagram and the spare power supply when work has been
completed.
parts list to determine the precise
– If the machine is defective, have it
cause of the damage, and order any
serviced by a qualified dealer
neccessary parts from Customer
immediately.
Service.
4
Seite 4
1 Electrical cord
2 Main grip
3 Locking button
4 On/Off trigger
5 Machine identifi-
cation plate
6 Front gripp
7 Dust collector bag
8 Vibration plate
9 Clamping device
10 Sandpaper
2 ).
On/Off switch
On: Press trigger A.
Continuous Lock trigger A with locking
operation: button B.
Off: Briefly depress trigger A.