Tabla de contenido
Publicidad
HT3000 HOST
App.3 INSTALLATION INSTRUCTIONS (VERTICAL SHIFT)
To install the HT3000 HOST system correctly place the projector so that the projected image completely fills the screen.
Ideally, to avoid image distortion, the projector should be positioned perfectly perpendicular to the projection screen,
as shown in the figure below. The centre of the projection lens should be lined up with the centre of the projection
screen.
Screen
Height
VERTICAL SHIFT (ASSUMING 0% OFFSET)
Screen
Height
CAUTION:
The examples shown in the figure give only general indication on the use of the vertical shift. Each projection
lens may require differing vertical shift settings. For more detailed information, see the technical specifications
or contact an authorised SIM2 Multimedia centre.
Sreen
Center= 0
Sreen
Center= 0
0 % O set
Lens projectione center
Projection Distance
0 % O set
Lens projectione center
Projection Distance
5
Publicidad
Tabla de contenido
