Installation
STEP 5 Connect to a water source (applicable models only)
CAUTION
• The water line must be connected by a qualified technician.
• The warranty for your refrigerator does not cover the water line installation. The
water line installation will be performed at your own costs unless the installation fee is
included in the retailer's price.
• Samsung takes no responsibility for the water line installation. If water leaks occur,
contact the installer of the water line.
NOTE
Do not reuse the existing hose set. Water leaks may occur. Make sure to use the provided
hose set that comes with your refrigerator.
To connect the cold water pipe to the water filtering hose
CAUTION
• Make sure the water filtering hose is connected to a cold, potable water source pipe.
Connecting to the hot water pipe may cause the purifier to malfunction.
A
C
30
English
Untitled-4 30
1. Shut off the water supply by closing the
main water valve (A).
B
2. Locate the cold, potable water pipe (B).
3. Follow the Water Line Installation to
connect to the water pipe (C). This
step must be performed by a qualified
technician.
4. When the connection is complete, open
the main water valve and dispense
about 3 liters of water. This is to
D
remove impurities inside the pipe.
CAUTION
Make sure that the water pipe has no
water leak (D).
2017-07-12
3:06:54