Operations
Ice making (applicable models only)
Twist ice maker
46
English
Untitled-4 46
1. Open the freezer door, and slide open
the ice tray.
2. Fill the tray with water up to the
A
maximum level (A) marked on the inner
rear of the tray.
3. Slide the tray back into position.
NOTE
• The ice making time depends on your
temperature settings.
• Make sure the ice cube storage bin is in
place under the ice tray.
• To dispense the ice cubes, turn the
handle of the bin to the right to empty
half of the ice cubes into the bin. Then,
turn it to the left to empty the other
half.
• Take out the bin by slightly twisting
and pulling to the front.
CAUTION
The ice maker is designed to make ice of
mineral or potable water only. Do not fill
any other liquids than mineral or potable
water with the ice tray.
2017-07-12
3:06:58