General Safety Warnings For Motor Tools - Truper MOTB-2 Manual Del Usuario

Keep your work area clean, tidy and well lit.
CAUTION
Cluttered and dark areas may cause accidents.
Never use the tool in explosive areas or in the presence
of flammable liquids.
DANGER
Before starting the motor keep the tool at least
30 feet away from the fill up area.
Keep children and passersby at a safe distance while
operating the tool.
WARNING
Distractions could cause loosing control and cause
accidents.
Avoid contact with power lines and circuits.
DANGER
Find and avoid power lines and circuits, especially
hidden wiring as well as any grounded object.
Stay alert, use care and common sense.
CAUTION Familiarity with the tool operation could lead to
distractions. It could cause accidents.
Refrain from using the tool if tired or under the
influence of drugs, alcohol or medication.
DANGER
Being momentarily distracted while using the tool could
cause severe personal injury.
Operate the tool with guards and protection devices in
place and in good working condition.
WARNING
Failure to comply with this warning is a hazard of severe
personal injury.
Do not force the tool.
CAUTION Working within the tool's working design assures
a better and safer job.
Keep the tool in a safe place and out of the reach of
children.
WARNING
Motor powered tools are dangerous to
inexperienced people.
Wear proper clothes.
WARNING Loose clothes, jewelry or long hair could get
caught in the mobile parts.
Keep hands away from rotating and/or mobile parts.
WARNING
Failure to comply with this warning is a hazard
of severe personal injury.
Do not operate the tool in enclosed areas.
DANGER Avoid breathing accumulated carbon monoxide, a
potentially deadly odorless toxic gas.
4 ENGLISH
General Safety Warnings
for Motor Tools
Wear adequate protective safety accessories.
CAUTION
Wear eye protection, dust mask, non-skid safety shoes,
helmet and ear plugs. These safety gears reduce the risk
of injury.
Turn off the tool before adjusting, changing accessories
or storin.
WARNING
Double check the tool switch is in the off position.
Refrain from operating the tool if the switch is not
working or is not properly assembled.
WARNING
Failure to complain with this warning is a hazard of
personal injury. Immediately send it to a
Do not overreach.
CAUTION
Good balance and support lead to better controlling the tool
in unexpected situations.
Avoid the tool to unintentionally start.
WARNING
Double-check the tool motor is off
before maintenance or putting it away.
Remove brackets before turning on the tool.
DANGER
Additional tools or vices installed in a rotating part could
cause severe personal injury.
Service the tool and double-check it is in good working
conditions before operating.
CAUTION
Carefully check mobile parts, alignment and assembly.
Do it periodically. Look for any damaged element or part
not working properly. Repair immediately in a
Accessories.
CAUTION
Use only accessories or spare parts indicated in this
Manual or certified by
Never leave a running tool unattended.
Turn off and disconnect the tool after using. Set it in a
DANGER
safe position to avoid severe injury.
Never smoke in the proximity of fuel.
Do not smoke in the proximity of the fuelling
DANGER
area or when using the tool.
Do not touch parts with high temperatures.
The surface of the engine and the exhaust reach high temperatures during the
operation of the tool..
Service and repair.
Always go to a Authorized Service Center to use identical spare
parts and maintain the security of the tool.
Authorized Service Center.
Authorized Service Center.
.