Technical Data; Fuel Specifications - Truper MOTB-2 Manual Del Usuario

Technical Data

Description
Motor Cylinders
Motor Rated Power
Motor Type
No Load Speed
Gas Tank Capacity
Fuel Yield at 100% Fill Up
Inlet and Outlet Diameters
Maximum Suction Depth
Maximum Height
Maximum Flow
Noise Level
Thermal Energy Consumption

Fuel Specifications

• The equipment has an air-cooled 4-stroke motor using
pure unleaded gasoline.
• For no reason at all mix oil with the fuel.
• For no reason at all use fuel mixed
WARNING
with ethyl alcohol (gasohol), ethanol or methane. These
attract humidity causing separation and acid build up
when stored. Acidity can damage the motor fuel system
when stored.
• To avoid having problems with the motor, please drain
the fuel system before storing the equipment 30 days or
longer. Drain the gasoline tank, start the motor and leave
it running until the fuel lines are empty. Next season, use
fresh gasoline.
MOTB-2
Code
17116
5.5 Hp
Fuel
0.60 gal
1.66 hours
Oil Type
2"
132 gal/min
Lower than 81 dB at 13'
0.36 gal/h
Weight
50.7 lb
MOTB-3
17117
Water Pump
191 cm
3
6 Hp
4-stroke OHV
3 650 RPM - 3 700 RPM
Gasoline
0.68 gal
1.5 hours
SAE 10W/30
3"
16.4 feet
82 feet
238 gal/min
Lower than 82 dB at 13' Lower than 83 dB at 13'
0.45 gal/h
57.3 lb
• Never use inside the gasoline tank products to clean motors
or carburetors. Those products can cause permanent
damage to the Motor.
Do not use the equipment in closed areas.
DANGER
Prevent breathing accumulated carbon
monoxide, an odorless, toxic and potentially fatal gas.
Never smoke near fuel.
DANGER
Do not smoke near the filling-up
area or while operating the equipment.
MOTB-4
17118
267 cm
3
8 Hp
1.37 gal
2 hours
4"
396 gal/min
0.65 gal/h
92.6 lb
3
ENGLISH