Morningstar SunSaver MPPT Serie Manual De Instalación Y Operación página 6

Removing the Battery Select jumper
2. Select Load Control – Low Voltage Disconnect / Reconnect
Switch 2 OFF (i):
Switch 2 ON (h):
These values can be modified with custom programming.
2
3. Enable or Disable Auto-Equalization
Switch 3 OFF (i):
Switch 3 ON (h):
4. Communication – Meter / MODBUS®
Switch 4 OFF (i):
Switch 4 ON (h):
Morningstar PC Meterbus Adapter (Model: MSC) required.
2
5. Mounting
To mount, mark four mounting holes, drill holes 3/32" (2.5 mm) and
screw controller to surface.
LVD = 11.50 V, LVR = 12.60 V
LVD = 11.00 V, LVR = 12.10 V
Auto-Equalize OFF
Auto-Equalize ON
(agm, flooded battery type only)
Every 28 days or if the battery
discharges too low the previous night.
Morningstar Remote Meter
Modbus® protocol for
MSView, 3rd party devices
6
2
2