Important Safety Information - Morningstar SunSaver MPPT Serie Manual De Instalación Y Operación

Save These Instructions
This manual contains important safety, installation and operating
instructions for the SunSaver MPPT solar controller.
The following symbols are used throughout this manual to indicate
potentially dangerous conditions or mark important safety instructions.
WARNING: Indicates a potentially dangerous
condition. Use extreme caution when performing
this task.
CAUTION: Indicates a critical procedure for safe
and proper operation of the controller.
NOTE: Indicates a procedure or function that is
important for the safe and proper operation of the
controller.
General Safety Information
• There are no user serviceable parts inside the SunSaver MPPT. Do not
disassemble or attempt to repair the controller.
• Disconnect all sources of power to the controller before installing or
adjusting the SunSaver MPPT.
• There are no fuses or disconnects inside the SunSaver MPPT. Install
external fuses/breakers as required.
• Do not allow water to enter the controller.
• Confirm that power connections are tightened to avoid excessive
heating from a loose connection.
• Only charge lead-acid or NiCd batteries.

IMPORTANT SAFETY INFORMATION

3