Selecting The Channel Directly; Receiving Weather Or Traffic Information From Sat Radio; Ipod ® (Optional); Playback - Alpine IVA-D100 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Screen example for channel name search list
The selected channel is received.
Returns to the category search list.
2
Touch [ ] of the selected Category or Channel
name.
The channel in the selected category is tuned.
• When the channel number is selected, the channel is displayed in
order of channel number. When the channel name is selected, the
channel is displayed in alphabetical order.

Selecting the Channel directly

You can directly select the channel number on the display of the
numeric keypad.
1
Touch [PAGE1/3] twice in the XM or SIRIUS mode.
The function guide appears.
2
Touch [10KEY].
The numeric keypad input screen is displayed.
3
Touch to input the channel number.
4
Touch [ENT].
The selected channel is received.
Receiving Weather or Traffic information
from SAT Radio
1
Touch [PAGE1/3] twice in the XM or SIRIUS mode.
The function guide appears.
2
Touch and hold [BAND] for at least 2 seconds.
The received weather or traffic channel is stored.
3
Press and hold BAND/SAT for at least 2 seconds on
the unit.
The stored Weather or Traffic channel is recalled.
4
Press and hold BAND/SAT for at least 2 seconds on
the unit.
Returns to the normal mode.
• Stored channels can also be recalled by pressing and holding BAND/
SAT for at least 2 seconds on the unit, even in modes other than XM
or SIRIUS mode.
• Channels other than Weather or Traffic information can also be
stored and recalled.
52
-EN
®
iPod
(Optional)
®
An iPod
can be connected to the IVA-D100 by using the proprietary
TM
ALPINE FULL SPEED
connection cable (KCE-422i). When the
IVA-D100 is connected by using the cable, the controls on the iPod are
not functional.
About iPods usable with this unit
The unit can be used with generation three and above iPod, iPod photo,
iPod minis or iPod nanos only. However, future generation iPod
compatibility cannot be guranteed.
• Touch wheel or scroll wheel type iPods without the dock connector
cannot be connected to the unit.
• The unit can be used with the following iPod versions. Correct
function of earlier versions cannot be guranteed.
Third generation iPod: Ver. 2.3
Fourth generation iPod: Ver 3.0.2
iPod photo: Ver.1.1
iPod mini: Ver. 1.3
iPod nano: Ver. 1.0
• The unit cannot be used with the software versions earlier than
"2005-02-22." For details about "iPod Software Update," refer to
the iPod Instruction Manual.

Playback

1
Press SOURCE/POWER.
The source selection screen is displayed.
2
Touch [ ] of iPod.
The display shows the iPod mode screen.
3
Touch [
] or [
Return to the beginning of the current song:
Touch [
].
Fast reverse:
Touch and hold [
].
Advance to the beginning of the next song:
Touch [
].
Fast forward:
Touch and hold [
].
4
To pause playback, touch [
Touching [
/
] again will resume playback.
• If a song is playing on the iPod when it is connected to the IVA-D100,
it will continue playing after the connection.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
IVA-D100. Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 128 (128
byte).
• Some characters may not be correctly displayed.
• "NO SUPPORT" is displayed when text information is not
compatible with the IVA-D100.
] to select the desired song.
/
].

Publicidad

Tabla de contenido
loading

Tabla de contenido