Identification - Abicor Binzel M-Drive MFS-V3 Instructivo De Servicio

M-Drive

1 Identification

The M-Drive is part of the MFS-V3 wire feeder system and is used in industry and the trade for the delivery
of welding wire or solder. The main component is a 4-roll wire drive. Depending on the version, further
media (coolant, shielding gas, welding current) required for the joining process can be added to the process
via the M-Drive.
The following M-Drive versions are available:
• M-Drive cable assembly
• M-Drive Masterliner
The M-Drive may only be used in conjunction with the ABICOR BINZEL master feeder system and may
only be operated using original ABICOR BINZEL spare parts.
1.1 CE marking
This device fulfils the requirements of the relevant EU directives.
Conformity is confirmed by the CE marking on the device.
1 Identification
EN - 3