Identification; Eu Declaration Of Conformity En; Responsibilities Of The User En - Abicor Binzel ABIDRIVE CW Manual Del Usuario

TIG cold wire feeder

1 Identification

The ABIDRIVE CW is a wire feeder. It is used in industry for delivering welding filler materials for manual
and automatic TIG cold-wire welding processes. The most important components of the ABIDRIVE CW are
the wire feed with separate power supply, the wire spool and the control modules integrated into the
housing. These operating instructions only describe the ABIDRIVE CW.
1.1 EU Declaration of Conformity
according to the EC Machinery Directive 06/42/EC,
EC Low Voltage Directive 2006/95/EC, Annex III
EC Electromagnetic Compatibility Directive 2004/108/EC.
We,
Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker 7-9
D-35418 Alten-Buseck
hereby declare that, on the basis of its design and construction, the present versions of the ABIDRIVE CW
described in these operating instructions complies with the basic safety and health requirements of the EC
directive. Any modification not agreed with us will void this declaration.
Designation
TIG cold wire feeder ABIDRIVE CW
Relevant EC Directives
EC Machinery Directive 06/42/EC
EC Low Voltage Directive 2006/95/EC, Annex III
EC Electromagnetic Compatibility Directive 2004/108/EC.
Harmonised standard applied
DIN EN 60 974 Part 5 Wire feeding systems
EN 50199 EMC Product Standard for Arc Welding Equipment
1.2 Responsibilities of the user
Within the EEA (European Economic Area), the current version of the national implementation
of the Framework Directive (89/391/EEC) and the related individual directives and, of these, especially
Directive (89/655/EEC) concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Labor Protection Law and the Company
Safety Ordinance must be heeded. In addition, the operator must ensure that the welding torch and welding
unit comply with the EC EMC Directive (2004/108/EC) and that the signal utilisation of the integrated
welding current monitoring against stray currents is installed properly.
1 Identification
EN - 3