Klarstein Windwalker Manual De Instrucciones página 80

EN
80
5. Press the "ON/OFF" button again, the air-conditioner stops.
Note: The cold wind type has no heating function.
Fan operation mode (FAN)
1. Press the "MODE" button, select the fan operation mode.
2. By pressing the "SPEED" button, you can select the fan speed from LOW, MID,
HIGH.
3. Press the "ON/OFF" button, the air-conditioner starts to operate.
4. Press the "ON/OFF" button again, the air-conditioner stops.
Note: In the fan operation mode, the temperature settings is non-effective.
Drying­operation­mode­(DRY)­
1. Press the "MODE" button, select the drying operation mode.
2. By pressing the or
(60 °F) to 32 °C (90 °F), the display changes as you touch the button.
3. By pressing the "SPEED" button, you can select the fan speed from LOW, MID,
HIGH, AUTO.
4. Press the "ON/OFF" button, the air-conditioner starts to operate.
5. Press the "ON/OFF" button again, the air-conditioner stops.
Backlight function (for remote controllers with such function only)
The remote controller has a backlight which can be turned on by pressing any button for
the convenience of operation in darkness. The backlight will be automatically turned off
if there is no operation within 10 seconds.
button, you can set the temperature range from 16 °C