Setup For Macintosh - Axis 5570e Guia De Instalacion

Page 30

Setup for Macintosh

Mac OS X using Bonjour
Bonjour is available from Mac OS X 10.2 and up. Bonjour is enabled by default in the print server. You can alter the
Bonjour parameters from the print server's Web interface: select Admin | Network Settings | Detailed View |
TCP/IP Network.
From the Apple menu, select Go | Applications | Utilities and start the Print Center or the Printer Setup Utility.
1.
Click Add in the Printer List.
2.
From the drop-down list, select Bonjour.
3.
4. Highlight the printer you want to install. The print server's default name is AXISxxxxxx Network Print Server
(where the xs represent the last six digits of the print server's serial number) followed by the ports available.
Example: AXIS610282 Network Print Server_USB1.
Click Add to finish the installation.
5.
The print server has now been added to the Printer List. If you wish to configure printer settings, click Printers |
Configure Printer.
To Change the Bonjour Service Name
You can change the print server's Bonjour service name via the print server's Web interface: Admin | Network
Settings | Detailed View | TCP/IP Network => Bonjour Service Name.
If the print server using Bonjour is already installed and the print server name or service name is changed, the print
server must be removed from the Printer List and then re-installed with the new Bonjour service name.
Mac OS X using AppleTalk
To establish communication with the TCP/IP network, you must assign an IP address to your AXIS 5570e print
server. Refer to Assign an IP address.
This section describes setting up your AXIS 5570e for printing in Mac OS X.
1. Select Print Center from the Applications | Utilities folder.
2. Click Add Printer...
3. From the Printer List dialog, select IP Printing.
4. Enter the IP address or Host name of your AXIS 5570e.
5. Select Use Default Queue on Server or enter LPT1 or USB1 in the Queue Name field.
6. Select an appropriate printer driver for your printer or, if it is not available in the list, select Generic. You can
also browse for a printer driver on your computer or network by selecting Other... from the list.
7. Click Add to complete the installation.
Proceed to Print Server Management and Configuration for information on supported management and
configuration tools.
Mac OS 9.1 or older
Basic configuration in AppleTalk is performed simply by opening the Chooser window and selecting a printer. See
the AXIS 5570e User's Manual for detailed instructions.
AXIS 5570e Installation Guide