Publicidad
Idiomas disponibles
Idiomas disponibles
Oven position and temperature (approximate) table
220-280 ºC
250-300 ºC
220-250 ºC
200-220 ºC
220-250 ºC
The positioning and electrical and gas installation should always be carried out by an AUTHORISED
TECHNICIAN, observing the standards of each country.
•
It is advisable to install an extraction hood for the optimum operation of the appliance.
•
Place the appliance in a well-ventilated place.
•
Level and adjust the height of the appliance. (Fig. 1) and (Fig. 1A)
An AUTHORISED TECHNICIAN should always carry out the appliance's electrical connection.
The legal standards in force in each country on connections to the mains should be taken into account.
Check that the mains voltage corresponds to that indicated on the nameplate.
Use cable sleeves made out of polychloroprene or other similar materials (H05RN-F), for the connection.
A switch device should be installed next to the appliance for all the phases, with a gap of a minimum of 3
mm between contacts. This switch will be equipped with fuses.
It is obligatory to earth the appliance. The manufacturer takes no responsibility if this requirement is not
fulfilled.
An AUTHORISED TECHNICIAN should always carry out the appliance's electrical connection.
The legal standards in force in each country on connections to the mains should be taken into account.
1.-INSTALLATION
Positioning and levelling
Electrical connection
Electrical connection
17
(Table no. 3)
230-250 ºC
230-250 ºC
210-240 ºC
200-230 ºC
190-210 ºC
1
90 ºC
2
120 ºC
3
170 ºC
4
200 ºC
5
230 ºC
6
260 ºC
7
280 ºC
8
315 ºC
Publicidad
