Grounding Instruction - Ingersoll Rand QE4 Serie Manual De Instrucciones

Refer to the "Grounding Instruction Section," found in the Ingersoll-Rand DC Electric Tool Controller manuals and to those found here in
this manual.
•
Do not allow chemicals such as acetone benzene, thinner,
ketone, trichloroethylene to come in contact with the
housing, as damage will result.
WARNING
This is the safety alert symbol.
It is used to alert you to potential
personal injury hazards. Obey all
safety messages that follow this
symbol to avoid possible injury
or death.
The use of other than genuine Ingersoll-Rand replacement parts may result in safety hazards, decreased tool performance, and increased
maintenance, and may invalidate all warranties.
Repairs should be made only by authorized trained personnel. Consult your nearest Ingersoll-Rand Authorized Servicenter.
For 'Assembly/Disassembly' and other maintenance instructions regarding these products, see Service Manual P7644 (QE4),
P7645 (QE6) and P7646 and P7775 (QE8) located at www.irtools.com/techdocuments, or contact the nearest Ingersoll-Rand Office
or Distributor.

GROUNDING INSTRUCTION

CAUTION
WARNING SYMBOL IDENTIFICATION
Always wear eye protection
when operating or performing
maintenance on this tool.
WARNING
Always wear hearing
protection when operating
this tool.
AGENCY SYMBOL IDENTIFICATION
European Community Mark
Indicates compliance with
relevant EC directives.
NOTICE
•
Have the tool serviced at least once a year.
•
Keep the exterior of the unit clean and dry.
WARNING
WARNING
This symbol is to alert the
users and service personnel to
the presence of uninsulated
dangerous voltage that will
cause a risk of electrical shock.
3
WARNING
Read this manual before
operating tool.