Maintenance & Adjustment; Maintenance Schedule - Troy-Bilt TB30R Manual Del Operador

Maintenance & Adjustments

Maintenance Schedule

Check Engine Oil Level
Check Air Filter for Dirty, Loose or Damaged Parts
Clean and Re-oil Air Filter's Foam Pre-cleaner
(if Equipped)
Replace Air Filter Element
Change Engine Oil and Replace Oil Filter
(if Equipped)
Clean Battery Terminals
Lube Front Axles and Rims
Clean Engine Cooling Fins
Check Spark Plug Condition & Gap
Replace Fuel Filter
IMPORTANT:
It is important to consult the specific Engine Operator's Manual included with this machine for detailed engine
maintenance procedures and intervals.
Maintenance
WARNING:
repairs, disengage PTO, set parking brake, stop
engine and remove key to prevent unintended
starting.
Engine
Refer to the Engine Owner's Manual for engine maintenance
instructions.
Check engine oil level before each use as instructed in the Engine
Owner's Manual packed with your unit. Follow the instructions
carefully.
Changing Engine Oil
For draining oil from the engine's crankcase, proceed as follows:
1. Run the engine for a few minutes to allow the oil in the
crankcase to warm up. Warm oil will flow more freely and
carry away more of the engine sediment which may have
settled at the bottom of the crankcase. Use care to avoid
burns from hot oil.
22
Before
Each use
P
P
Before performing any maintenance or
Every Every Every
10 Hours 25 Hours 50 Hours
P
P
P
P
P
P
2. Locate the oil drain valve on the right side of the engine
and the oil fill cap on the topside of the engine.
3. Unscrew the oil fill cap and remove the dipstick from the oil
fill tube.
6
Every Prior
100 Hours to Storing
P
P
P
P
P P
P