Fama Mignon Serie Manual De Instruccion página 28

CHAP. 6. SELLING
The crossed container symbol on the machine shows that the product at the end of its
useful life must be collected separately from other refusals
If we decide to not use ever the machine because it is obsolete, damaged or worn, its out of service must be entrusted to
specialized and trained personnel. At the end of the dismantling activities all identification plates and other document must be
destroyed. The machine can be sold without the possibility to reduce it in small pieces; it is sufficient to disconnect the main
groups that compose it and to send them for the scrapping.
Don't sell the machine like mixed urban refusal, perform the waste separation.
The machine collection or harvest systems are:
• Collection through distributor consortium
• Delivery possibility to the machine distributor equivalent to the purchasing certificate of a new machine.
In the machine there aren't dangerous substances with potentially negative effects on the ambient and on the human health. It
is fundamental that the purchasers contribute to the reuse, to the recycling and to the other forms of machine restoring. It is the
employer obligation to be aware of the actual laws of own country and work so to be comply with these legislations.
It is forbidden and besides liable of penalties to leave the machine and the electric equipment in the
ambient.
CHAP. 7. MANUFACTURING MATERIALS
In accordance with the functioning and production requirements, the machine can be constituted with different typology of
manufacturing materials.
GROUP
Machine body and hopper
Knifes and drilled plate
Grinding group
Milled grater roll
Pressure, handle, grater mouth
MATERIALS TYPOLOGY
Stainless Steel Stainless steel
18/8 AISI 304
●
●
●
ORIGINAL INSTRUCTIONS TRANSLATION
Stainless steel Aluminum for
AISI 440 foods
●
●
●
●
Treated steel
for foods
●
Pag. di
13 13