Layout; Items Supplied; Intended Use - Parkside PDSS 310 A1 Instrucciones De Utilización Y De Seguridad

Anleitung_LB5_4138944:_
for the user.
Make the operating instructions available to
■
every user.
Check the rating plate and markings on the
■
equipment regularly for legibility. If there is
any damage, contact our Service Center.
Use and service the equipment as
■
recommended in the operating instructions.
This will help you to minimize dust, gas,
noise and vibrations.
If dust or gas arises, they must be checked
■
as a priority at the moment they arise.
Select, service and use the consumables /
■
plug-in tools as recommended in the
operating instructions. This will help you to
prevent unnecessary dust, gas, noise and
vibrations. Stop using the equipment if you
experience numbness, tingling, pain or
whitening of the skin on your fingers or
hands and consult a doctor.
Whipping hoses may cause serious injuries.
■
Always check the equipment for damaged
or loose hoses and connections.
Do not use any quick-lock couplings at the
■
air inlet. Use hose connections with a
hardened steel thread (or a material with
comparable resistance to vibrations).
If universal rotary couplings (claw couplings)
■
are used, lock pins must be installed and a
retention system for compressed air hoses
used in order to protect against possible
faulty connections ("hose to tool" or "hose to
hose").
3. Layout (Fig. 1/2)
1. Setting screw (torque)
2. Trigger lever
3. Reverse facility (clockwise/counter-
clockwise)
4. Square driver mount for connector
5. Adjusting screw
6. Nipple
7. Extension attachment
8. Special compressed air oil
9. Plug-on attachments (sizes: 9 mm, 10 mm,
11 mm, 13 mm, 14 mm, 17 mm, 19 mm,
22 mm, 24 mm, 27 mm)
12.04.2011 15:36 Uhr Seite 43

4. Items supplied

Open the packaging and take out the
■
equipment with care.
Remove the packaging material and any
■
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
■
Inspect the equipment and accessories for
■
transport damage.
If possible, please keep the packaging until
■
the end of the guarantee period.
IMPORTANT
The equipment and packaging material are
not toys. Do not let children play with
plastic bags, foils or small parts. There is a
danger of swallowing or suffocating!
Air hammer screwdriver
■
Nipple
■
Extension attachment
■
Special compressed air oil
■
Plug-on attachments (10 items)
■
Original operating instructions
■

5. Intended use

The hammer screwdriver is a handy,
pneumatically operated tool designed for DIY
applications and in the automotive field.
It is suitable for fastening and releasing
threaded connections on motor vehicles (fitting
tyres, etc.), as well as in the agricultural sector.
The exhaust air emerges via the trigger lever (2)
towards the bottom.
The plug-on attachments (9) can be changed
easily and quickly. The compressed air supply
is connected via a nipple and a quick-lock
coupling.
The equipment is to be used only for its pre-
scribed purpose. Any other use is deemed to be
a case of misuse. The user/operator and not the
manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
GB/
MT
43