HP Cricut Imagine Manual De Instrucciones página 9

3. Remove the print cartridge from its pack-
age, and then remove the clear nozzle pro-
tective tape by pulling on the pink pull-tab.
CAUtIon: To prevent clogs, ink failure,
and bad electrical connections, do not
touch the print cartridge ink nozzles or
copper contacts, and do not remove the
copper contacts.
4. Find the identification symbol on the print
cartridge and locate the print cartridge
latch which has the same symbol.
5. Hold the print cartridge with the copper
contacts facing the printer, and then slide
the print cartridge fully into the cradle.
note: If you have trouble inserting the
print cartridge after lifting the cartridge
latch, verify that the printer is on and wait a
few seconds for the carriage to disengage
before inserting the print cartridge.
6. Push down on the print cartridge latch until
it snaps closed. Make sure the latch does
not spring back open.
note: If the latch springs back open,
remove the print cartridge and repeat steps
4 and 5.
7. Close the ink access door.
GETTInG STARTED 9