pico Technology PicoConnect 442 Guia Del Usuario página 7

3. Connection
Follow these instructions to start using your differential probe.
1. Plug the D9(m) output connector into the input channel of a PicoScope 4444
differential oscilloscope.
2. Using the test leads and hooks supplied, connect the probe to the circuit under
test.
a
b
CAT III environment
a. 1000 V CAT III sprung hook test probes
b. 1000 V CAT III test leads
c. PicoConnect 442 probe output cable
d. Pico blue USB cable
DO283-2 Copyright © 2017 Pico Technology Ltd. All rights reserved.
PicoConnect 442 Differential Probe User's Guide
Protected environment
d
c
5