1.3 Attach Brackets to TV
Center the TV brackets
and
04
IMPORTANT:
The
TVs with 100 mm (4 in. wide) mounting hole spacing - these TVs require switching the TV brackets
Install using the spacer, TV screw and washer combination
CAUTION:
Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only enough to
secure the TV bracket to the TV. DO NOT overtighten the screws.
ONLY for 100 mm (4 in.)
TV mounting hole spacing,
switch the TV brackets
04
and
on your TV.
05
04
05
T
100 mm (4 in.)
over your TV hole pattern - making sure the brackets are level.
05
T
tilt tension knob
on
TV brackets
05
04
T
and
should normally be oriented to the outside edges, EXCEPT for
04
05
or
you selected for your TV.
A
B
If your TV included
inset spacers or wall mount
adapters, use them
UNDER the
mount hardware.
and
.
04
05
NO SPACER
A
T
SPACER NEEDED
B
03
01
02
01
02
9