Setup - WAGNER Home Décor Manual Del Propietário

Setup

h Thinning the material
Thinning the spray material results in faster spraying, a better finish and less material usage.
• Thin chalk, milk, latex and other thicker decorative paints with water
• Oil-based materials need to be thinned with mineral spirits.
• Transparent/semi-transparent stains, clear topcoats and lacquers do not require thinning.
Do not thin with materials that have a flashpoint below 100°F (38°C).
The material flashpoint should be shown on the material container.
1
2
Spray
material
3
4
© Wagner Spray Tech. - All Rights Reserved
note: For a video showing how to set up the Home
Décor Sprayer, visit www.homedecorsprayer.com.
1. Unscrew the container from the spray
2. Fill the container with spray material
Water
note: For every notch that the fluid
level in the container rises, the spray
material is diluted by 10%.
3. Align the suction tube -
4. Screw the container back onto the
gun.
Secure the thinning accessory to the
side of the container.
to the bottom of any one of the
notches on the thinning accessory.
Add water or mineral spirits to the top
of the same notch to thin by 10%.
• Spraying downwards: the angled
end of the suction tube should be
pointing toward the front of the
gun.
• Spraying upwards: the angled
end of the suction tube should be
pointing toward the rear of the
gun.
spray gun and attach the hose to the
gun and base.
English
5