Troubleshooting; What To Do, If - bora PI 11-000 Instrucciones De Montaje Y De Uso

Troubleshooting

What to do, if ...

... H H H H flashes on the display
Possible cause
■ Overtemperature protection
has been triggered.
... there are unpleasant smells when the cooking zone is used for the first
time after commissioning
Possible cause
■ This is normal for brand-new
appliances.
... the appliance fails to work and all indicators remain off
Possible cause
■ Fuse or automatic circuit
breaker of your apartment or
house installation is defective
or has been triggered.
■ The fuse or the automatic
circuit breaker is repeatedly
triggered.
■ Power failure.
... s s s s is shown on one or both displays
Possible cause
■ One toggle is continuously in a
turn-out position.
■ Wire break between cooktop
and turn knob.
30
Remedy
► Check whether the pot or pan and the food
are still OK.
► Allows the cooking zone to cool down.
► Continue cooking on the other cooking zone.
Remedy
► Ventilate the room.
► The smell will disappear after a few hours of
operation of the cooktop.
Remedy
► Change fuse.
► Reset automatic circuit breaker.
► Call BORA Lüftungstechnik GmbH.
► Check power supply.
Remedy
► Reset toggle.
Call BORA Lüftungstechnik GmbH.
►