Flush Installation Of Cooktop; Installation Of The Cooktop In The Worktop Cut-Out - bora PI 11-000 Instrucciones De Montaje Y De Uso

... Installation

Flush installation of cooktop

► Place the cooktop in the cut-out. Seal
the gap between the cooktop and the
hob with
silicone adhesive.
silicone adhesive with a putty knife.

Installation of the cooktop in the worktop cut-out

► Place the cooktop in the cut-out and secure it with the clamps.
The BORA logo must be positioned in the rear right corner of the built-in cooktops.
10
a temperature-resistant
Remove
temperature-resistant
silicone adhesive
excess