Automatic Heat-Up Function - bora PI 11-000 Instrucciones De Montaje Y De Uso

... Operation

Automatic heat-up function

Never leave the appliance unattended when using the
up function. Small quantities of food are heated very quickly!
Both cooking zones are equipped with the optional
When this function is switched on, the cooking zone works for a set time (see
table) at maximum output rate. After this time has lapsed, the cooking zone is
automatically switched back to the set
The automatic heat-up
zone is switched on.
Switching on
► Push in the toggle of the knob of the desired cooking zone and turn it briefly to
the left to the A symbol. Subsequently (within 5 seconds), select the power
level for continuous cooking.
─ While the
played.
─ After the set heat-up time has lapsed, the cooking zone is automatically
reduced to the normal power level.
Power level
Heat-up time in minutes
If a power level that is higher than the
chosen as the normal cooking level, the timer is reset.
Manually switching off automatic heat-up function
The activated automatic heat-up
■ Reducing the normal cooking power level.
■ Adjusting the
■ Activating the high power level P P P P .
■ Activating the
function must be reactivated each time a cooking
automatic heat-up
1
2
/
3
function is automatically switched off by:
9 9 9 9 .
power level
u u u u .
warming level
power level.
function is activated, the A A A A symbol is dis-
2 3 4
1 2 3
automatic heat-up
automatic heat-
automatic heat-up
5 6 7
1
4 / 7 2
4
function level is
function.
8
3
25