Installation Of The Cooktop In The Worktop Cut-Out - bora PI 11-000 Instrucciones De Montaje Y De Uso

... Installation

Installation of the cooktop in the worktop cut-out

The distance between the cut-out edge and the rear and side walls must be
minimum 65 mm.
For installation in built-in kitchen units, ensure that the plastic or veneer of the
■
units is applied with heat-resistant adhesive as it might otherwise become
loose or deformed, especially at the edges.
Seal the exposed cut-out edge with a sealant such as
■
370
346
silicone.
7