Maytag MVW18CSAGW0 Instrucciones De Instalación página 17

ELECTRONIC CONTROLS SET-UP iNSTRUCTiONS
Control Set=up Procedures
iMPORTANT: Read all instructions before operating.
The three key pads on the left side, the top key pad on the right
side, and the digital display are used to set up the controls. The
display can contain 4 numbers and/or letters and a decimal point.
These are used to indicate the set-up codes and related code
values available for use in programming the washer.
How to use the key pads to program the controls
1. The LEFT UPPER (POWER WASH) key pad is used to adjust
the values associated with set-up codes. Pressing the key
pad will increment the value.
Rapid adjustment is possible by holding the key pad down.
2. The LEFT MIDDLE (NORMAL) key pad will advance you
through the set-up codes. Pressing the key pad will advance
you to the next available set-up code. Holding the key pad
down will automatically advance through the set-up codes at
a rate of one (1) per second.
3. The LEFT LOWER (DELICATES) key pad is used to select or
deselect options.
4. The RIGHT UPPER (TEMPERATURE) key pad is used to
decrease set-up code value.
Start Operating Set-Up
[] PD Models: insert access door key, turn, and lift to remove
access door.
iMPORTANT: The console must not be opened unless power is
first removed from the washer. To access connector _%_,1 :
-_ Unplug washer or disconnect power.
-_ Open console, disconnect plug on _1, close console.
-_ Plug in washer or reconnect power.
The washer is now in the set-up mode.
Before proceeding, it is worth noting that, despite all of the
options available, an owner can simply choose to uncrate a new
commercial washer, hook it up, plug it in, and have a unit that
operates.
Set-up Codes
[] The LEFT MIDDLE (NORMAL) key pad will advance from code
to code.
[] The LEFT UPPER (POWER WASH) key pad will increase the
code value.
[] The LEFT LOWER (DELICATES) key pad will select or
deselect options.
[] The RIGHT UPPER (TEMPERATURE) key pad will decrease
the code value.
The set-up code is indicated by the one or two left-hand
characters. The set-up code value is indicated by the two
or three right-hand characters.
6.06 NORMALRegular C ycleVendPrice- Increase or decrease
NORMAL between0 and200by pressingthe LEFTUPPERor RIGHT
UPPERkeypad. Factorypresetfor6 coins = $1.50.
6.04 DELICATES Regular C ycleVendPrice- Increase or decrease
DELICATESbetween0 and200by pressingthe LEFTUPPERor RIGHT
UPPERkeypad. Factorypresetfor4 coins = $1.00.
6.08 POWERWASH R egularCycleVendPrice- Increase or decrease
POWERWASH between0 and200by pressingthe LEFTUPPER or RIGHT
UPPERkeypad. Factorypresetfor8 coins = $2.00.
-_ Pressthe LEFTMIDDLE keypad onceto advanceto nextcode.
7.00 ADDITIONAL WASHTIME
7.00 Thisis the numberof minutesthatcan be addedto a WashCycle.
Choosefrom 00-05minutesby pressingthe LEFTUPPERkey
pad.
-_ Pressthe LEFTMIDDLE keypad onceto advanceto nextcode.
ADDITIONAL RINSETiME 8.00
8.00 This isthe numberof minutesthatcan be addedto a RINSE
Cycle. Choosefrom 00-05minutesby pressingthe LEFTUPPER
keypad.
NOTE:Additional r insetimeonly availableindefaultedbath
rinses,not insprayrinseoption.
-> Pressthe LEFTMIDDLE keypad onceto advanceto nextcode.
9.00 CYCLECOUNTEROPTION
Thisoption is eitherSELECTED 'ON' or NOTSELECTED 'OFF'.
9.00 NotSelected'OFF'.
9.0C Selected'ON' andnot able to be deselected.
Pressthe LEFTLOWER key pad3 consecutive times to select
'ON'.Once selected'ON' it cannotbe deselected.
.e Pressthe LEFTMIDDLE keypad onceto advanceto nextcode.
1.00 MONEYCOUNTER OPTION
Thisoption is eitherSELECTED 'ON' or NOTSELECTED 'OFF'.
1.00 NotSelected'OFF'.
1.0C Selected'ON'.
Pressthe LEFTLOWER keypad 3 consecutive times to select
'ON' and3 consecutive times to remove(Not Selected'OFF'.)
Counterresetsby goingfrom 'OFF'to 'ON'.
1.C0 Selected'ON' andnot able to be deselected.
Toselect 'ON' andnot ableto be deselected, f irst select 'ON',
thenwithintwo secondspressthe LEFTLOWER key padtwice,
the LEFTUPPERkeypadonce,andexit the set-upmode.
-> Pressthe LEFTMIDDLE keypad onceto advanceto nextcode.
2.00 SPECIALPRiCiNGOPTION
Thisoption is eitherSELECTED 'ON' or NOTSELECTED 'OFF'.
2.00 NotSelected'OFF'.
2.SP Selected'ON'. Pressthe LEFTLOWER key padonceforthis
selection.
if SPECIALPRICINGOPTIONisselected, there is access to codes '3.'
through '9,',
NOTE:An externalbatteryneedsto be addedto keepthe clockrunningduring
periodsof power outages.
-> Pressthe LEFTMIDDLE keypad onceto advanceto nextcode.
17