Operation
Using the AUX IN Jack (Continued)
X
Energy Saving Mode
(Auto Power System-APS)
The unit will automatically enter the Standby mode after 15 minutes in the following
situations:
1. There is no CD in the compartment or the playback of CD has been stopped;
2. The playback of external music player had been stopped but the audio cable is still
plugged into the AUX IN jack;
3. The Bluetooth music has been stopped.
The unit can be resumed to turn on by pressing the ON/STANDBY button once.
APS is for energy saving purposes.
6
Adjust the MIC VOLUME control
as desired. Increasing this control
will increase the volume of both
microphones.
V
7
Rotate the ECHO control to add an
W
echo effect to your voice. Rotate
U
towards MAX to increase the echo
effect.
8
Adjust the balance between the
speakers using the BALANCE control.
9
Press the ON/STANDBY button to
turn the unit off.
— E14 —