Generac GT-530 El Manual Del Propietario página 2

Use this page to record important information about your generator set.
Imortant!: To register your product, go to: register.generac.com
Model:
Serial:
Prod Date Week:
Volts:
LPV AMPS:
NG AMPS:
HZ:
Phase:
Controller P/N:
To find your Local AUTHORIZED SERVICE DEALER
ii
AUTHORIZED SERVICE DEALER LOCATION
For customer support please contact:
All Power - Australia
www.allpower.com.au
All Power - New Zealand
www.allpower.co.nz
Record the information found on your unit data label on this
page. For the location of the unit data label, see Section 2
General Information. The unit has a label plate affixed to the
inside partition, to the left of the control panel console as
shown in Figures 2-1, 2-2, and 2-3. For directions on how to
open the top lid and remove the front panel, see Section 3
Operation.
When contacting an Authorized Service Dealer about parts
and service, always supply the complete model number and
serial number of the unit.
Operation and Maintenance: Proper maintenance and care
of the generator ensures a minimum number of problems
and keeps operating expenses at a minimum. It is the opera-
tor's responsibility to perform all safety checks, to make sure
that all maintenance for safe operation is performed
promptly, and to have the equipment checked periodically by
an Authorized Service Dealer. Normal maintenance, service
and replacement of parts are the responsibility of the owner/
operator and, as such, are not considered defects in materi-
als or workmanship within the terms of the warranty. Individ-
ual operating habits and usage may contribute to the need
for additional maintenance or service.
When the generator requires servicing or repairs, contact an
Authorized Service Dealer for assistance. Authorized service
technicians are factory-trained and are capable of handling
all service needs.
Owner's Manual for 50 Hz Air-cooled Generators