How To Enter The Sample For Piece Counting; Piece Counting Function; Standard Calibrations - Gram CM Serie Manual De Utilización

HOW TO CLEAR WEIGHT ACCUMULATIONS
1. Press the
be erased.

HOW TO ENTER THE SAMPLE FOR PIECE COUNTING

1. Press the
2. Use the numeric keys from 0 to 9 to enter desired sample quantity.
3. Place the same amount of pieces as sample pieces entered.
4. Press the
5. The scale will be ready to count.
6. To exit counting mode, press the
• The screen will display the message U.-- when the sample unit weight is less
than 0.2 d
• The screen will display the message S. -- when the sample weight is less than
20 d.
• The screen will display the message U.--S.-- if the unit weight and sample
weigh are less than 0.2 and 20 d

PIECE COUNTING FUNCTION

1. Press the
2. If the scale has no previous sample count saved, it will display U.— for 2 seconds
and will activate counting functions. In this moment, please proceed to enter the
sample as it is described in the previous chapter.

STANDARD CALIBRATIONS

Press the and the
Calibrations.
ECF-1 Weight Calibration (Zero and Span)
ECF-2 Zero Calibration
ECF-3 Span Calibration
key and all the weight accumulations which were carried out will
key.
key.
key to activate counting mode.
key in weighing mode to start Standard
key.
10