Statement Of Use; Product Data - Desoutter FAS3000 Instrucciones Para El Operario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
FAS3000
Desoutter Limited Eaton Road Hemel Hempstead Hertfordshire HP2 7DR England
GB

STATEMENT OF USE

This product is intended to be used to monitor the operation of CP fastening tools. No other use permitted. For professional use only.
DISPOSAL
To be disposed of in accordance with local legislation.
"© Copyright 2002, CP Desoutter HP2 7DR"
All rights reserved. Any unauthorised use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks,
model denominations, part numbers and drawings. Use only authorised parts. Any damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or Product Liability."
WARNINGS
1.
Use an air supply, which is: water free, filtered and regulated to 6.3 bar.
2.
"WARNING: THIS APPLIANCE MUST BE EARTHED"
3.
This appliance is only to be serviced by CP authorised representatives.
4.
Disconnect from the power supply before servicing.
5.
Failure to comply with these operating instructions may impair the safety of this equipment.
6.
Must not be used in explosive atmospheres.
EMC
"This device has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. Any
changes or modifications not expressly approved by CP Desoutter could void the user's authority to operate this device."

PRODUCT DATA

Electrical Supply :
I/O Connections:
Mass:
Temperature:
Max. Humidity:
Dirt & Dust protection:
Ventilation Requirements:
Earthing Requirements:
The FAS3000 may be bench mounted or wall mounted using the holes provided on the unit.
Maintenance Instructions
Replace as necessary the fuse, see figure 1.
Any other servicing to be carried out by CP Desoutter Authorised Representatives.
Supply
220 – 230V
110 –120V
Accessory
Pt No.
396843
396853
459323
Printed in USA
110 ~ V 60 Hz / 230 ~ V 50Hz
as Detailed in "Remote Interface"
3 kg
- 5 / 40 Centigrade
95% Rel Humidity (Non Condensing)
IP40
None
As per warnings
Max Fuse
0.5A (T)
1.0A (T)
Description
Mains power cable (UK)
Mains power cable (European)
Mains power cable (USA)
Figure 1 – Fuse Location
2 of 40
Fuse location
Part No. 2050479093 Issue 1 10.02

Publicidad

Tabla de contenido
loading

Tabla de contenido