Prexiso T.O.2 Manual De Usuario página 23

Set Date & Time
4. Minimum display resolution
• DSP 1: minimum display being 1"
• DSP 5: minimum display being 5"
• DSP 10: minimum display being 10"
5. Setting of tilt sensor
• V TILT ON: Turn on the tilt sensor
• V TILT OFF: Turn off the tilt sensor
6. Inidication of horizontal angle
• NO BEEP: Horizontal angle indicator disabled
• 90 BEEP: Gives out beep when the instrument
is close to 0°, 90°, 180° and 270°
Press and hold LIGHT and 0SET button while turning on the instrument. The instru-
ment shows ADJ2 and will switch automatically to the settings for date and time.
Press HOLD to move between fields, R/L to increase, V% to decrease. Press LIGHT
button to confirm and exit.
T.O.2 | 21