3. USER INTERFACE
3.1 DVR Access
Connect your USB mouse to one of the USB ports on the DVR front panel, and check if there's a mouse icon (
on the screen, indicating the USB mouse is detected properly.
Move your mouse to enter the DVR password with the password keypad. The default user name and password
are both "admin". The status will be changed from
Note: You may configure four different user levels to have different access privileges in "SYSTEM"
"ACCOUNT". For details, please refer to "4.2 User Level Creation" at page 13.
Password Input
3.2 Live Page
3.1.1 DVR Status
Key lock
Overwrite on
Internet disconnected
Local connection
USB flash drive / device connected
IVS on
Timer record on
PTZ mode on
Sequence mode on
(key lock) to
(unlock).
Key unlock
Overwrite off
Internet connected
USB mouse connected
No USB device connected
Timer record off
PTZ mode off
Sequence mode off
10
USER INTERFACE
)