Bushnell 737000V Manual De Instrucciones página 6

Charging the VideosCope
The Videoscope is powered by an internal, rechargeable lithium-ion battery. Before using
the Videoscope for the first time, it needs to be charged for approximately 10 hours (future
charge times should be shorter).
1. Plug the supplied USB cable into the AC Adapter (using the large, standard rectangular USB
plug), then insert the other end of the cable into the UsB port on the side of the Videoscope.
2. Plug the AC Adapter into a wall outlet. The status Led on top of the Videoscope will
glow red, turning green when the battery is fully charged (the light on the AC adapter is just a
power indicator and will remain red). You may want to simply let the battery charge overnight-it
will not overcharge if left plugged in for longer than 10 hours. 3. The AC adapter can then be
unplugged, and the USB cord removed from the Videoscope.
AC Adapter+USB Cable
6
AC Adapter Connected to Videoscope Car Lighter Plug