Recording A Video - Bushnell 737000V Manual De Instrucciones

reCording a Video

1. Turn on the Videoscope, by pressing and holding the power button until the green
status LED light and the LCD display screen comes on.
2. Before beginning a new recording, check the battery indicator icon at the top of the
display to make sure you have a fully or at least partly charged battery.
3. The display will show a "live" preview of the image from the camera lens. To begin
a video recording, simply press the record button. The display will indicate that you
are recording (red video camera icon appears) and a counter showing the elapsed time
since the recording began will be visible at the top of the display.
4. Press the record button again to stop recording. You may stop and start as often as
you like, recording videos of various lengths, until the memory is full. The memory
will hold a maximum of approximately 30 minutes of video-you are free to record one
long half hour video or any quantity of shorter videos-each time a new recording is
started then stopped, it will be saved in the internal memory as a separate video file
(.avi format).
5. To turn off the power, press and release the power button-the display and the status
LED will go out and no power will be drawn from the internal battery.
9
9