12
Get started
The memory card can be safely inserted or removed even
when the device is switched on. When you open the back
cover, the device cannot access the memory card, to protect
the data on the card. When you replace the back cover, the
memory card is accessible again.
A memory card may already be in the device. If not, do the
following:
1
To prevent the battery from coming loose, place the
device so that the back cover is facing up.
2
Place your finger in the grip, and lift the back cover up.
You do not need to press a button to release the back
cover.
3
To release the memory card holder, slide the holder
toward the battery (1), and lift up the end of the holder
(2). Insert a compatible memory card into the holder (3).
Make sure the contact area on the card is facing the
connectors on the device. Close the holder (4), and slide
it back to lock it into place (5).
4
Replace the back cover. Keep the device facing down
when replacing the cover. Make sure the cover is properly
closed.
© 2010 Nokia. All rights reserved.