Built-In Cd Player; Playing A Cd; Repeating Play; Pausing Cd Playback - Pioneer DEH-2700R Manual De Operación

Built-in CD Player

Playing a CD

1 2
1 RPT indicator
Shows when repeat play is turned on.
2 Track number indicator
Shows the track currently playing.
3 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Insert a CD into the CD loading slot.
Playback will automatically start.
# Be sure to turn up the label side of a disc.
# After a CD has been inserted, press SOURCE
to select the built-in CD player.
# You can eject a CD by pressing EJECT.
2 Use VOLUME to adjust the sound level.
3 To perform fast forward or reverse,
press and hold c or d.
4 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
! Do not insert anything other than a CD into
the CD loading slot.
3
! If an error message such as ERROR-11 is dis-
played, refer to Understanding built-in CD
player error messages on page 16.

Repeating play

Repeat play lets you hear the same track over
again.
% Press 5 repeatedly to turn repeat play
on or off.
When repeat play is on, RPT appears in the
display.
# If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
% Press PAUSE repeatedly to turn pause
on or off.
When pause is on, PAUSE appears in the dis-
play.
Section
06
11
En