Audio Adjustments; Introduction Of Audio Adjustments; Using Balance Adjustment; Using The Btb (Bass Treble Booster) - Pioneer DEH-17 Manual De Operación

Section
06

Audio Adjustments

Introduction of audio
adjustments
1 Audio display
Shows the audio adjustments status.
2 LOUD indicator
Appears in the display when loudness is
turned on.
% Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)BASS (bass ad-
justment)TREBLE (treble adjustment)
LOUD (loudness)SLA (source level adjust-
ment)
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
# To return to the display of each source, press
BAND.

Using balance adjustment

You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD.
# If the balance setting has been previously ad-
justed, BAL will be displayed.
2 Press + or  to adjust front/rear speaker
balance.
FAD F15  FAD R15 is displayed as the front/
rear speaker balance moves from front to rear.
10
En
1 2
# FAD 0 is the proper setting when only two
speakers are used.
3 Press c or d to adjust left/right speaker
balance.
BAL L9  BAL R9 is displayed as the left/right
speaker balance moves from left to right.
Using the BTB (bass treble
booster)
There are five stored BTB settings such as
DYNAMIC, POWER, MAX, CUSTOM and
FLAT that can easily recall at any time.
! CUSTOM is an adjusted BTB setting that
you create.
! When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check effect of the BTB settings
by switching alternatively between FLAT
and set BTB setting.
% Press BTB to select the desired BTB set-
ting.
Press BTB repeatedly to switch between the
following BTB setting:
POWERMAXCUSTOMFLAT
DYNAMIC

Adjusting BTB

You can adjust the currently selected BTB set-
ting as desired. Adjusted BTB settings are
memorized in CUSTOM.
Adjusting bass
You can adjust the bass level.
1 Press AUDIO to select BASS.
2 Press + or  to adjust the bass level.
+6  6 is displayed as the level is increased
or decreased.
Adjusting treble
You can adjust the treble level.