Configuration 220/127V Without Auxiliary Coil - WEG K38L Manual De Instalación, Operación Y Mantenimiento

8.5 CONFIGURATION 220/127V WITHOUT AUXILIARY COIL

ATTENTION!
!
The sensing voltage input selection switch(SW2) must be on E1 position.
The external potentiometer is optional. In case it is not used, terminals 6 and 7 must be
short-circuited.
The connection without auxiliary coil should be avoided, unless it is not available. In this
case, the power must be supplied by the generator's load terminals.
1Kx3W (optional)
U
V
W
N
-
+
Automatic Voltage Regulator - K38L | 15
www.weg.net
1 4
7 10
2 5
8 11
3 6
9 12