Configuration Single Voltage Delta 220V Without Auxiliary Coil - WEG K38L Manual De Instalación, Operación Y Mantenimiento

8.7 CONFIGURATION 220V DELTA SINGLE VOLTAGE WITHOUT AUXILIARY COIL
ATTENTION!
!
The sensing voltage input selection switch(SW2) must be on E1 position.
The external potentiometer is optional. In case it is not used, terminals 6 and 7 must be
short-circuited.
The connection without auxiliary coil should be avoided, unless it is not available. In this
case, the power must be supplied by the generator's load terminals.
1Kx3W (optional)
U
V
W
-
+
Automatic Voltage Regulator - K38L | 17
www.weg.net
(220V)