Abicor Binzel ABIMIG W Serie Instructivo De Servicio página 18

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com.
1 Identification
1.1 CE marking
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Emergency information
3 Product description
3.1 Technical data
3.2 Signs and symbols used
4 Scope of delivery
5 Putting into operation
5.1 Setting up the torch
5.2 Attaching the wire guide
5.2.1 Liner
5.2.2 PA liner
EN - 2
EN-3 5.3 Connecting the cable assembly
EN-3 5.4 Connecting the coolant
5.5 Setting the shielding gas volume EN-10
EN-3 5.6 Feed in the wire
EN-3
EN-4 6 Handle control elements
EN-4 6.1 Two-cycle trigger function
EN-4 7 Operation
EN-5
EN-6 8 Putting out of operation
EN-6 9 Maintenance and cleaning EN-12
9.1 Cleaning the cable assembly
EN-6 9.2 Cleaning the torch neck
EN-7
EN-8 10 Troubleshooting
EN-8
EN-9 11 Disposal
®
ABIMIG
EN-9
EN-10
EN-10
EN-11
EN-11
EN-11
EN-11
EN-13
EN-14
EN-14
EN-15
BAL.0085 • 2017-03-02
W