STEP 2A Attach Wall Plate to Wall
CAUTION:
Avoid potential personal injury or property damage!
●
Drywall covering the wall must not exceed 5/8 in. (16 mm)
●
Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 11/2 x 31/2 in. (38 x 89 mm)
●
Minimum horizontal space between fasteners: 16 in. (406 mm)
1.
Locate your stud. Verify and mark the center of the stud by fi nding the stud edges using an awl, a thin nail, or an edge-to-edge stud fi nder.
2.
Position the wall template
NOTE: TV shifts 3.0 in. (7.6 cm) to the right or left when in the home position. Consider this when selecting the location of your wall mount.
1
Max.
5/8 in.
(16 mm)
12
15
at your desired height and line up the holes with your stud center line. Level the template and tape in place.
Min.
16 in.
(406 mm)
Wood Stud ONLY
2
15
TV SHIFT (OFFSET)
3.0 in. (7.6 cm)
W E L C
O M E
A N D
T H A N
K S F O
R C H
O O S IN
G S A
N U S
D E C O
R A
16
19