Dascom Tally MIP480 Guia Del Usuario página 104

Command Sets
Function
Barcode
Setup barcode parameter
(0 ≤ n 1 , n 2 ≤ 255) (n = n 1 + n 2 X 256)
k: Barcode type
k Barcode type
m: Module width
m Module width
s: Space width adjustment
s Space width adjustment
"s" is used for fine adjustment for each "spaces" to match the optical conditions.
There is no effect for the "bar" width adjustment.
Range :-3≦s≦3
v 1 , v 2 : Bar length
v 1, v 2 Bar length
Bar length is described 2 bytes v1 shows lower byte. v2 shows upper bytes.
And bar length is controlled by multiple value of an unit of 1/2160 inch.
Minimum value of v1, v2:
vertical pitch : All the input data is rounded to the multiple value.
C-10
k value barcode type
B1 hex CODABAR (NW7)
B2 hex EAN-13
B3 hex EAN-8
B4 hex CODE 39
B5 hex INDUSTRIAL 2 OF 5
B6 hex INTERLEAVED 2 OF 5
B7 hex UPC-A
B8 hex UPC-E
BA hex CODE128
m unit module dots
00 hex default(2 dots)
01 hex 2 dots
02 hex 2 dots
03 hex 3 dots
04 hex 4 dots
288 dec
Command
ESC [f (n 1 ) (n 2 ) (k) (m) (s) (v 1 ) (v 2 )
(c) (data)