Dascom Tally MIP480 Guia Del Usuario página 99

Function
Vertical tab execution
Set vertical tabs
The values of n 1 to n k in this command are the ASCII values of
the lines (at the current line spacing) at which tabs are to be
set.
(1 ≤ n ≤ 255) (1 ≤ k ≤ 64)
Clear all vertical tabs
Reset tabs to default values
Page Formatting
Set left margin at column n and right
margin at column m (0 ≤ n, m ≤ 255)
Set perforation skip by n lines
(1 ≤ n ≤ 255)
Perforation skip off
Set page length to n lines (1 ≤ n ≤ 255)
Set page length to n inches (1 ≤ n ≤ 22)
Set top of form
Character Set Control
Select character set 1
Select character set 2
Print n 1 + n 2 X 256 characters from all-character set
(chars.: codes of characters to print,
0 ≤ chars. ≤ 255)
Print a character from all-character set
(char.: a code of character to print,
0 ≤ char. ≤ 255)
Command
VT
ESC B (n 1 ) ... (n k ) NUL
ESC B NUL
ESC R
ESC X (n) (m)
ESC N (n)
ESC O
ESC C (n)
ESC C NUL (n)
ESC 4
ESC 7
ESC 6
ESC \ (n 1 ) (n 2 ) (chars.)
ESC ^ (char.)
Command Sets
C-5