Special Functions; Ups Communicator Self-Diagnostic Software - LEGRAND Daker DK 1 kVA Manual De Instalación

®
4 Installation

Special functions

he UPS has two programmable outputs for the less critical loads. These sockets may be disabled or
timed, during battery operation, to ensure quality power supply for the more critical loads.
To access both this and other functions download the "UPS Setting tool" free of charge from the
www.ups.legrand.com website.
Connection
The UPS has standard RS232 and USB interfaces that provide access, through a processor, to a range
of data for the operation and the history of the UPS.
This function can be accessed through a WINDOWS (*) interfacing program, connecting a serial
port of the PC to the interface sockets [indicate the reference number] that can be found on the
back of the UPS using an RS232 or USB cable.

5 UPS communicator self-diagnostic software

From the website www.ups.legrand.com it is possible to download free of charge a self-diagnostic
software running on WINDOWS (16 e 32 bit) e Linux platforms.
This software can be used for the following functions:
- Display of all the operation and diagnostic data in case of problems.
- Setup of special functions.
- Automatic shutdown of the local computer (Windows and Linux operating systems).
* Windows is a registered trademark of Microsoft Corporation.
32