Installation Instruction - Amana AP125HD Manual De Instrucciones

Your window kit has been designed to fit most standard vertical and horizontal window applications.
However, it may be necessary for you to improvise/modify some aspects of the installation procedures
for certain type windows. Please refer to for minimum and maximum window openings.

Installation Instruction

• Air outlet intake on the indoor side should not be blocked by curtains, or other similar objects.
• The end of air hose cannot be blocked by shutters or other similar objects.
• Do not bend the air hose when assembling, keep it straight.
• When appliance in cool or dry mode, condensate may concentrate in water box of chassis. When
the box is full, water full indicator lights up (red), LCD window appears the error sign E. The
appliance will stop running at the same time. Unplug the unit from the outlet, then pull out the
rubber plug in drain port located on the bottom of the appliance, drain the water into a prepared
container, or drain the water by moving the appliance to a suitable place.
Note: Water should be drained out when the water full light is on. Otherwise, the appliance
will not work.
• Select the Best Location where there is beside the window, the door or the French window.
• Keep the required distance from the return air outlet to the wall or other obstacles at least 20".
• Attach one end of each hose to the unit, they will snap in. Connect the other end of each hose to
the window kit that comes with the unit.
• Air outlet or intake can not be blocked by protective grid or something alike.
• The distance between two ends of the air hose should be kept at 8" at least.
Note: It is not recommended to use only one hose. This will greatly reduce the cooling
capacity of the unit.
Fig. 3
English
(7)