Friedrich SQ06 Manual De Instalación Y Funcionamiento página 10

Residential Schedule (option 1).
Commercial Schedule (option 2).
To select/save an option, press the TIMER SET button (Figure 7) while
on the desired selection. If there is no button activity for 15 seconds, the
function will time out and leave the original selection.
Once the selection is saved (or timed out), the display reverts to the
normal display.
To activate the selected timer or schedule, press the
Scheduler Activated Scenarios
If the Schedule function is activated during normal operation, the
and Timer icons illuminates and the unit immediately runs the current
period schedule parameters, as shown below..
AUTO FAN
To deactivate and shut off the Schedule, press the
The and Timer icons will disappear and the unit will stay in
SCHEDULE
the current state. See example below.
10
1
SCHEDULE
2
SCHEDULE
button
79
F
SET POINT
SCHEDULE
button again.
FRR137
Timer - Scheduler Control Block
If the unit is operating in the TIMER or SCHEDULE mode, all buttons are
locked out except the
icon begins to blink for 3 seconds. In order to make any changes, you
must first deactivate the Timer or Schedule by pressing the
FRIEDRICHLINK WI-FI CONTROL
The FriedrichLink Wireless Adapter Accessory (sold separately) allows
you to unlock the full control potential of your Kuhl unit.
You can control, create customized schedules, group units for zone cooling,
and many other options remotely from a smartphone, tablet or computer.
When FriedrichLink is in use, the
system is receiving a Wi-Fi connection.
FRR138
SCHEDULE
EXTERNAL CONTROL STATUS
The icon illuminates to indicate that the system is being controlled
$MART
remotely for a Demand Response event.
FRR155
79
F
AUTO FAN
SET POINT
button. If any other button is pressed, the Timer
icon illuminates to indicate that the
79
F
AUTO FAN
SET POINT
79
F
AUTO FAN
SET POINT
$MART
FRR161
button.
FRR126
FRR125