Friedrich SQ06 Manual De Instalación Y Funcionamiento página 71

Réglage del'heure d'arêt:
Ap uyezet maintenez enfoncé la touche MIN (figure 7) pendant 3
secondes. L'icône "OFF" se affiche surl'écran
Utiliser les touches ou pour ajuster l'hure.
Appuyezs sur la touche Timer Set (figure 7) pour en registrer l'heuree
taller aux minutes. L'exempleci-dessous montre une heure d'arrêt
de 11 heures.
Utiliser les touches ou pour ajuster les minutes. Appuyez sur la
touche Timer Set (figure 7) dans les 15 secondes pour quitter et
enregistrer le réglage. L'exemple ci-dessous est maintenant réglé pour se
(. The examp le below is now set to turn off at 11:55 AM, once the Time r is
éteindre à 11: 55 heures, une fois la minuterie est activée. L'affichage
activa ted .
revient à la normale une fois que les paramètres sont enregistrés.
The display will return to normal once the settings are saved.
NOTE: Setting the Timer's start and stop times do not activate the
timer.
To activate the timer, you must press the
Timer Activated Scenarios
Once the Timer's Start and Stop times have been saved, you can
activate the Timer by pressing the
If the Timer function is activated during the ON time, the Timer icon
illuminates and the unit will continue to run in the existing mode
(system mode, fan mode, fan speed, set temperature, etc.) Until the
set OFF time occurs. See the example below:
AUTO FAN
1 1
AM
OFF
55
OFF
button.
button.
79
F
SET POINT
When the set OFF time occurs or the Timer function is activated
during the OFF time, the until will turn of, but the
illuminated as shown below.
To deactivate and shut off the Timer, press the
FRR145
button in the ON and off times, the icon disappears. If the unit was in
an ON time, the unit will stay in the current state. If the unit was in an
OFF time, the unit will turn back on in the last state operated.
TIMER and PRE-PROGRAMMED SCHEDULING
The TIMER SCHEDULE
24-HOUR Timer - System default (already covered)
Residential Schedule (option 1) - 40 Hr. Work Week:
This option causes your unit to raise temperatures to 85°F during the
typical work day, lower them again to 75°F prior to the time when
most people will return home, and raise slightly to 82°F overnight.
Commercial Schedule (option 2) - 5 Day Business Week
This option causes your unit to raise temperature to 84°F alter typical
working hours and on weekends when commercial spaces are
typically unoccupied.
FRR146
(Refer to Addendum 1 in the back of this manual for both Residential
and Commercial Schedual Tables.)
To select between these 3 options, press and hold the
for 3 seconds. You will then be able to toggle between Timer (default),
Residential Schedule (1) and Commercial Schedule (2) by pressing the
or
24-Hour Timer (system)
FRR159
has three options:
buttons. See below for images of each option.
icon will remain
FRR157
button
FRR139
69